Need help?Do you have a question about the Honeywell GKP-S8M and is the answer not in the manual?
Guides users on how to adjust the beep level for different devices on the keypad using the programming mode.
Instructions on how to enable or disable the keypad's chime feature through the user programming mode.
Steps to link a programmed TAG to a specific user profile on the keypad system.
Procedure for modifying the access code for an existing user profile on the keypad.
Process for disabling a user's access code while retaining their TAG for keypad operations.
Steps to remove a user profile from the keypad system, excluding the master user.
Instructions for re-enabling a user profile on the keypad system using the master programming mode.
Step-by-step guide for replacing the battery in the wireless keypad, including safety warnings.
Battery| battery type | 2x CR123A 3-Volt Lithium |
|---|---|
| battery life | 4 years |
| operating voltage | 3 V |
Operating Environment| operating temperature | -10°C to +55°C |
|---|---|
| storage temperature | -20°C to +70°C |
| operation and storage humidity | 5% to 95% (without condensation) |
Power| supply voltage fault threshold | 2.65 V |
|---|---|
| siren output | 92 dBA at 3m |
| consumption transmission | 23 mA (typ) |
| consumption alarm | 300 mA (max) |
| consumption standby | 39 μA (typ) |
Radio Specifications| radio frequency | 868 MHz |
|---|---|
| radio range | 2000 m in open field |
| radio protocol | ALPHA |
Weight and Dimensions| unit dimensions | 112.5 x 175.5 x 25 mm |
|---|---|
| weight without batteries | 259 g |
| weight with batteries | 290 g |
To Next Page
