To Next PageTo Next PageWhat to do if the Honeywell Security Camera power supply is unstable?
If you are experiencing an unstable power supply with your Honeywell Security Camera, it is strongly recommended to use a UPS (Uninterruptible Power Supply).
General| Resolution | 4MP (2560 x 1440) |
|---|---|
| Night Vision | Yes |
| Motion Detection | Yes |
| Lens | 2.8 mm |
| IR Distance | Up to 30m (98ft) |
| Storage | MicroSD card (up to 128GB) |
| Connectivity | Ethernet |
| Power Source | Power over Ethernet (PoE) |
Guide to install the Honeywell Unified Tool software for camera management.
Steps to find and identify cameras within the network.
Process to set up new cameras with initial configuration and passwords.
Instructions for updating camera firmware using the Unified Tool.
How to access camera interface via a web browser.
Step-by-step guide to log into the camera's web interface.
Setting up basic camera parameters like video standard.
How to configure video stream and ROI settings.
Configuring video stream properties like codec, resolution, and frame rate.
Adjusting brightness, saturation, contrast, and sharpness.
Configuring camera's day/night mode and IR settings.
Blocking sensitive areas in the video feed for privacy.
Setting up network type, IP protocol, DNS, and MTU.
Configuring HTTP and RTSP streaming protocols.
Setting up motion detection parameters and detection areas.
Configuring smart motion detection for specific object types.
Setting up alarm inputs and outputs for external devices.
Managing SD card status, compatibility, and usage.
Configuring general recording schedules, post-record durations, and audio.
Setting camera name, system time, and NTP.
Creating and managing user accounts with different privilege levels.
Setting and managing camera preset positions for PTZ control.
Guidelines for resolving common performance and display issues.
