Need help?Do you have a question about the Honeywell HC60NG and is the answer not in the manual?
General| Type | Non-Programmable |
|---|---|
| Display | Digital |
| Backlight | No |
| Temperature Control | Manual |
| Hold Function | Yes |
| Filter Change Alert | No |
| Power Source | Battery |
| Battery Type | AA Alkaline |
| Compatibility | Single Stage Heating and Cooling Systems |
| Temperature Range | 40°F to 90°F |
Safety warning regarding electric shock during installation and operation.
Warning about potential interference affecting data transfer.
Warning about device damage from humidity and moisture.
Warning about component damage from electrostatic discharges.
Details of the pre-configured Y6630D1007 kit components.
Information on setting up single devices not part of a kit.
Step-by-step guide for installing the HC60NG relay module.
Instructions for installing the HCW 80 room unit.
Procedure to check the system's basic functionality.
How to test the wireless signal strength between units.
Steps to assign the room unit to the relay module.
Troubleshooting steps when the teach-in process fails.
How to operate the HCW 80 room unit and interpret its indicators.
How to restrict the adjustable temperature range on the dial.
Details on fixed control parameters like minimum ON time.
A table listing common problems, causes, and remedies.
Technical specifications for the HCW 80 room unit.
Technical specifications for the HC60NG relay module.
Definitions and functions related to EN 60730-1 compliance.
Information on proper disposal of the product according to WEEE directive.
To Next Page
