Honeywell HCM-890 Series - Weekly Cleaning and Disinfection; Scale Removal for Base; Disinfecting the Water Tank

STEP TWO:
DISINFECTING
WATER TANK
1.Fillthewatertankwith:
•1teaspoonofhouseholdbleach
•1gallon(4L)ofwater.
Pour some of this solution into the
Rinse-to-Clean™Base.
2.Letsolutionstandfor20minutes.
3.Rinsewithwateruntiltheodorof
bleachisgone.
Werecommendcleaningthehumidifieronceaweek,moreoftenifyouhave
hardwaterornoticeabuildupofimpuritiesordetectunpleasantodors.
NOTE: THE USE OF OTHER WATER TREATMENT PRODUCTS MAY
DAMAGE THE FILTER OR HUMIDIFIER.
CleaninginvolvestwostepsSCALEREMOVALandDISINFECTING.Besureto
perform these in the proper order to avoid harmful chemical interactions.
•First,turnoffandunplugthehumidifier.
•RemovetheWaterTankandMotorHousing.
•RemovetheNaturalCoolMoisturefilterfromtheRinse-to-
Clean™Base.
•DiscardanyresidualwaterfromtheBase.
•Cleanalloutsidesurfaceswithadry,softcloth.DONOTUSEWATER.
THISMAYDAMAGETHEHUMIDIFIERORCAUSEELECTRICSHOCK.
STEP ONE:
SCALE REMOVAL
RINSE-TO-CLEAN™BASE
1.FilltheRinse-to-Clean™Base
withonecup(8ozs,250ml)of
undiluted white vinegar
2.Letsolutionstandfor20minutes
3.WiththevinegarintheRinse-to-
Clean™Base,cleanallinterior
surfaceswithasoftclothorbrush
to help remove scales.
4.RinsetheRinse-to-Clean™Base
thoroughly with water to remove
scale and cleaning solution.
NOTE:Removefilterbeforecleaning
Failuretoremovethefilterduringcleaningwilldestroythefilter
WEEKLY CLEANING