To Next Page

To Previous Page

NOTE: WHEN CARRYING THE FILLED WATER TANK, PLEASE USE THE HANDLE

AND PLACE YOUR OTHER HAND UNDER THE TANK FOR ADDITIONAL

SUPPORT.

• PlacetheMotorHousingbackontoRinse-to-Clean™Base.

• Oncethefilledtankhasbeenpositioned,donotattempttomovethe

humidifier.Ifithastobemoved,unplugthehumidifierandremovethe

water tank first.

NOTE: DONOTPOURWATERINTOTHEGRILLONTHETOPOFTHE

MOTORHOUSING.DOINGSOMAYDAMAGETHEHUMIDIFIERORCAUSE

PERSONAL INJURY.

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN

ELECTRIC SHOCK COULD OCCUR.

P O WE R

• WiththepowerswitchintheOFFposition,plug

thefilledhumidifierintoapolarized120Voutlet.

DONOTFORCETHEPOLARIZEDPLUGINTOTHE

OUTLET;itwillonlyfitoneway.

H U M I D I T Y C O N T R O L

1.Setthefanspeedcontroltothedesiredposition

(Fig.4).

HIGH: For fast humidifying

LOW: For quieter operation

NOTE: The length of time your humidifier runs will vary depending on the

qualityofconstructionandinsulationofyourroomandhouse,aswellasthe

fan speed.

2.TurnthehumidifierOFFifthehumiditylevelfeelstoomoistoryounotice

condensation forming on the walls and/or windows.

ALWAYSbesuretoemptyanyunusedwaterintheRinse-

to-Clean™Baseand/orWaterTankeachtimeyourefillthe

water tank or finish using the humidifier.

NOTE: To ensure proper humidity in your home,

you should use a hygrometer (room humidity

indictor) such as the E-10 and place across the

room from your humidifier. (Hygrometer

sold separately)

Fig.4

FILLING CONTINUED

OPERATION

Honeywell HCM-890 Series User Manual

Questions and Answers: