HE220 AND HE260 BY-PASS FLOW-THROUGH HUMIDIFIER
15 69-1111EF—05
3. Center punch the screw holes indicated and drill out with a 1/8 in. (13 mm) drill.
4. Attach the sail to the switch as shown in Fig 12.
Fig. 12. Attaching sail to switch.
5. Press together the sides of the wire loop. Insert the sail into the duct. (When in
the Off position, the sail should point into the direction of airflow as shown in
Fig.13.)
Fig. 13. Inserting sail switch in direction of airflow.
6. Secure the switch by using the sheet metal screws provided.
7. After wiring, snap on the cover.
– LOOSEN SETSCREW
– INSERT SAIL CORD
– TUCK CORD INTO TAB SLOTS
– TIGHTEN SETSCREW
SAIL
M31017
M20178A
AIRFLOW
69-1111E_C.fm Page 15 Monday, August 10, 2009 10:53 AM
To Next Page
Loading...
