69-2798EFS—03 8
Set
Cool
On
Built-in compressor protection
This feature helps prevent damage to the com-
pressor in your air conditioning or heat pump
system.
Damage can occur if the compressor is
restarted too soon after shutdown. This fea-
ture forces the compressor to wait 5 minutes
before restarting.
During the wait time, the display will flash the
message Cool On (or Heat On if you have a
heat pump model). When the safe wait time
has elapsed, the message stops flashing and
the compressor turns on.
Message flashes until
safe restart time has
elapsed.
To Next Page
Loading...
