HRDP H.264 Rev B DVR User Guide
______________________________________________________________________________________________
Document 800-06801 Rev F 25
02/13
Connection Guide
Connecting the Monitor
These monitor outputs are available for the HRDP H.264 Rev B recorder.
• Composite Monitor output for CCTV monitor – BNC (Marked MAIN)
• Spot monitor output for CCTV monitor – BNC (Marked SPOT)
• VGA output for VGA monitor – Mini-Sub D15
Video Inputs and Looping Outputs
The HRDP comes with 4/8/16 BNC video inputs on the rear of its chassis.
Each video input has a corresponding looping BNC output for passing the
video signal to another monitoring/recording device.
Connecting to a Network
Use the RJ45 jack on the rear of the DVR when connecting to a network.
Connecting Audio
To record audio on the DVR connect the audio source to the connections on
the audio ports on the back of the DVR.
To listen to live or recorded audio connect the Audio Out Port to an amplified
speaker system.
Note The DVR audio output is a line level source which requires an
amplified speaker system. The audio input can be from an amplified
source or line level microphone.
To Next Page
Loading...
