HRDP H.264 Rev B DVR User Guide
______________________________________________________________________________________________
Document 800-06801 Rev F 43
02/13
Monitor Configuration
TRANSPARENCY SETUP – 0 ~ 20 [Set the transparency of the setup
windows].
VGA RESOLUTION – Set monitor resolution.
FIT-IN VGA – Adjusts the display to display properly on a VGA monitor. When
the FIT-IN VGA check box is cleared, the display is adjusted to display on a
monitor connected to the MAIN BNC output.
OSD – Select the items to display on the screen (DATE, TIME, TITLE, PTZ,
RECORD, AUDIO).
Note If the VGA RESOLUTOIN is set to a size that is unsupported by the
monitor, the monitor may display an “OUT OF RANGE” message or
not display any image. To reset the VGA RESOLUTION, use the
front panel or use the IR Remote that came with the DVR, point it at
the DVR and press “LIVE + 4 + 1 + 1 + ENTER”.
To Next Page
Loading...
