Honeywell HS-1650 Series User Manual

IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING
THIS FAN
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
FOR US MODELS ONLY - This product
employs overload protection (fuse). A
blown fuse indicates an overload or short-
circuit situation. If the fuse blows, unplug
the product from the outlet. Replace the
fuse as per the user servicing instructions
(follow product marking for proper fuse
rating) and check the product. If the
replacement fuse blows, a short-circuit
may be present and the product should
be discarded or returned to an authorized
service facility for examination and/or
repair.
1. Use this fan only as described in this
manual. Other use not recommended as it
may cause fire, electric shock or injury to
persons.
2. This product is intended for household
use ONLY and not for commercial,
industrial or outdoor use.
3. To protect against electric shock, do not
place fan in window, immerse unit, plug
or cord in water or spray with liquids.
4. This appliance has a polarized plug
(one blade is wider than the other). To
reduce the risk of shock, this plug is
intended to fit only one way in a polarized
outlet. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety
feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan OFF and unplug the fan from
the outlet when not in use, when moving
the fan from one location to another and
before cleaning.
7. To disconnect the fan, first turn the unit
OFF, grip the plug and pull it from the
wall outlet. Never pull the plug by the
cord.
8. Do not operate the fan in the presence of
explosive and/or flammable fumes.
9. Do not place the fan or any parts near
an open flame, cooking or other heating
appliance.
10. Do not operate the fan with a
damaged cord or plug or if the product
malfunctions, is dropped
or damaged in any manner
(see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended
by the manufacturer may be hazardous.
13. Place the fan on a dry level surface.
14. Do not hang or mount fan on a wall
or ceiling.
15. Do not operate if the fan housing is
damaged.
16. A loose fit between the AC outlet
(receptacle) and plug may cause
overheating and a distortion of the plug.
Contact a qualified electrician to replace
loose or worn outlet.
QUIETSET
™
WHOLE ROOM STAND FAN
HS-1650 Series
HS-1660 Series
Owner’s Manual
The Honeywell trademark is used by Kaz USA, Inc. under license from Honeywell International Inc.
Honeywell International Inc. makes no representation or warranties with respect to this product.

Honeywell HS-1650 Series Specifications

General

Brand	Honeywell
Model	HS-1650 Series
Category	Fan
Language	English

Summary

Important Safety Instructions

General Safety Precautions

Essential safety guidelines for fan usage, including electrical safety, proper handling, and environmental considerations.

Polarized Plug Safety

Explanation of the polarized plug and how to ensure correct and safe insertion into outlets.

Fuse Protection for US Models

Information on the product's fuse, identifying an overload, and initial steps for fuse replacement.

Fused Safety Plug (US Models)

User Servicing Instructions

Step-by-step guide for safely checking and replacing the fuse in the fan's safety plug.

Assembly Instructions

Base and Pole Assembly

Instructions for assembling the fan's base, attaching the metal pole, and securing it.

Adjusting Fan Height

Guide on adjusting and securing the fan's height using the adjustment knob and pole extension.

Upper Portion Assembly

Steps for attaching the motor assembly, rear grille, fan blade, and front grille to the fan.

Remote Control Battery Installation

Instructions for installing and replacing batteries in the remote control unit.

Fan Operation

Basic Controls: ON/OFF, Speed, Timer

How to operate the fan's basic functions: turning it on/off, adjusting speed, and setting the timer.

Oscillation Control

Explanation of how to use the oscillation knob to start and stop the fan's oscillating motion.

Remote Control Operation

Remote Control Functions

Detailed guide on using the remote control for power, speed adjustment, and timer functions.

User Servicing Instructions

Cleaning and Storage Guide

Instructions for safely cleaning the fan and proper methods for storing the unit.

Front Grille Removal for Cleaning

Step-by-step process for removing and reassembling the front grille for thorough cleaning.

Consumer Relations

Contact and Support Information

Details on how to contact Kaz USA for questions, warranty issues, or product support.

1 Year Limited Warranty

Warranty Coverage and Limitations

Details on the warranty period, what is covered, and limitations on damage and implied warranties.

Return and Repair Process

Instructions for returning a defective product for repair or replacement, including shipping details.