Honeywell HY-047B - Fresh Breeze Tower Fan - Fan Operation: Remote Control (EFY-041;HY-041 Series); Remote Control Functionality Overview; Speed & Breeze Mode Control via Remote; Oscillation & Timer Control via Remote

Oscillation
To activate the Oscillation feature, press the Oscillation button ( ) once.
Press the
Oscillation button again to turn the Oscillation feature off.
Timer Function
The Timer can be set in two hour increments. Choose from 2, 4, 6, or 8 hour settings by
performing the following function:
• 2 hours: Press the
Timer button ( ) once.
• 4 hours: Press the
Timer button twice.
• 6 hours: Press the
Timer button a third time.
• 8 hours: Press the
Timer button a fourth time.
Press the
Timer button a fifth time to turn the Timer feature off.
Breeze Mode
A.
Press the Breeze Mode button ( ) once to operate Breeze Mode in the low breeze
setting. The low breeze mode operates in accordance with the chosen speed setting
of the fan as follows:
• High Fan Speed: Breeze Mode will alternate between the high and medium speed
settings
• Medium Fan Speed: Breeze Mode will alternate between the medium and low
speed settings
• Low Fan Speed: Breeze Mode will alternate between the low and off setting
B. Press the Breeze Mode button a second time to operate the fan in high Breeze
Mode. This will operate the fan in a random high/medium/low pattern regardless of
the speed setting.
C. Press the Breeze Mode button a third time to turn the Breeze Mode off.
Note: The Remote Control functions the same
as the control panel on the fan.
On/Off:
Press the Power button ( ) once to turn the
fan on. Press the Power button a second time
to turn the fan off.
Speed Control
The fan will automatically start on the High
speed setting when initially turned on. To
adjust the speed up or down, press the
Fan
Speed button
once for Low speed, and twice for Medium speed. Pressing the Fan
Speed button
a third time will return the fan to High speed operation.
Note: When the fan is turned off and restarted using the Power button, it will operate in
the same speed setting that it was last set to. If unplugged, the fan will reset to start on
High speed when turned on again.
EFY-041 SERIES REMOTE CONTROL OPERATIONEFY-041 SERIES AND HY-041 SERIES REMOTE CONTROL OPERATION