INTRODUCTION
FOR ENERGY SAVINGS ALL YEAR
Honeywell Air Circulator Fans can help save energy and lower monthly bills all year round. Our air circulators
increase distribution of cooler air from your air conditioner or warmer air from your heating system, creating a vortex
of air flow for increased comfort. Increased air flow allows the air conditioner and heating systems to be used at
lower settings to help save you money.
In the summer:
Circulate cool air by using with window or central air conditioning.
In the winter:
Circulate warm air. Position your air circulator in an open location for upward air movement. Run it on a low setting to
move the hotter air from the ceiling and circulate the warmer air throughout the room.
In the winter:
Use with other heat sources, such as wood stoves, baseboard heaters, and/or vents to help circulate the warm air
throughout the room.
ASSEMBLY INSTRUCTIONS
1. BASE ASSEMBLY
Align the front and back base pieces and gently push the halves until the pieces snap securely together. (Fig
3).
2. SECURING THE TOWER FAN TO THE BASE
At the base of the housing, remove the locking nut and set aside (Fig. 4)
Carefully lift the fan housing (Fig. 5) and place the power cord through the center of the base.
Lower the fan housing into the base (Fig. 6).
Take the locking nut and thread the power cord through the locking nut and move the nut up the power cord,
(Fig.7). Attach the locking nut to the fan housing by turning clockwise until fully tightened.
The fan cord can exit either side of the base; choose which one is closer to your outlet. (Fig. 8)
The back of this fan is intentionally closed. This allows the air intake and exit to happen at the front grille. This
aerodynamic cross-flow design harnesses the Turbo Force® power of your fan!
To Next Page
Loading...
