Need help?Do you have a question about the Honeywell KLN 90B and is the answer not in the manual?
Overview of the Bendix/King KLN 90B GPS Receiver and installation procedures.
Details the KLN 90B's purpose, display, and navigation capabilities.
Covers ARINC 429 formats and unit specifications.
Explains the ARINC 429 serial bus interface and GAMA format.
Lists physical dimensions, operational ranges, and power requirements.
Details available KLN 90B versions and included items.
Lists different KLN 90B unit versions and their part numbers.
Information on ordering KA 91 and KA 92 GPS antennas.
Details the KLN 90/90B installation kit contents.
Lists contents for KA 91 and KA 92 installation kits.
Information on database cartridges for geographic areas.
Lists essential accessories needed for installation and operation.
Details available optional items for enhancing functionality.
States that no specific license requirements are applicable.
Provides guidelines for IFR certification requirements.
Requirement for logging aircraft installation details.
Specific installation criteria for IFR approval.
Describes the interface requirements for OBS resolver for D-Bar resolution.
Details requirements for NAV/GPS, WPT/MSG, and GPS CRS/OBS/LEG.
Requirements for an altitude source for IFR certification.
Notes on isolation diodes for units below S/N 1542.
Need for an approved flight manual supplement.
Specifies placement of the KLN 90B pilot's guide.
Procedures for maintaining the unit's airworthiness.
Suggestions for optimal KLN 90B GPS RNAV installation.
Guidelines for safely unpacking and checking the equipment.
Covers the process of installing the KLN 90B unit.
Emphasizes the importance of cooling for avionics reliability.
Provides suggestions for satisfactory mechanical installation.
Identifies the designated GPS antennas for the KLN 90B.
Guidelines for optimal antenna mounting and placement.
Step-by-step instructions for physically mounting the antenna.
Details on wiring and electrical connections for the KLN 90B.
Covers input voltage and panel lighting wiring.
Explains the function of each pin on the KLN 90B connector.
Procedures for verifying correct installation and operation.
Step-by-step guide to calibrate the KLN 90B's resolvers.
Outlines procedures for checking installed signal Input/Output capabilities.
Verifies power, lighting, and basic unit operation after installation.
Procedures to check all connected signal Input/Output signals.
General steps to perform for all installations.
Verifies correct interface with EFIS or CDI/HSI units.
Checks flight plan display on Radar Graphics unit.
Verifies proper altitude indication from Air Data Computer.
Checks altitude indication from encoding altimeter.
Verifies RMI indication after self-test.
Tests ELT communication and position reporting.
Verifies moving map display operation with KLN 90B data.
Checks if all external annunciators are energized and function correctly.
Verifies correct display of NM, KTS, and MIN on the distance indicator.
Instructions for updating the data base using a PC.
Checks the function of altitude alert and audio outputs.
Verifies heading information input for calculations and orientation.
Tests roll steering functionality and output activation.
Refers to the KLN 90B Pilot's Guide for operating controls.
Defines the characteristics of the RS-232 interface.
Explains different ways to connect RS-232 input/output.
Describes data transmission in normal and test modes.
Details the format of RS-232 navigation and self-test data.
Specifies the format for navigation and self-test data output.
Defines the formats for RS-232 data inputs.
Explains the ASCII formats for fuel/air data input.
Manual for supplemental procedures.
Supplement for aircraft flight manual.
Type certificate for supplemental use.
Troubleshooting guide for GPS errors and messages.
Lists receiver hardware error codes and suggested actions.
Explains GPS messages and recommended actions.
Details errors related to the data loader function.
Forms related to environmental qualification testing.
Details environmental test conditions and results.
Records revisions made to the environmental qualification form.
Contains additional notes regarding test conditions.
Environmental qualification details for the KA 92 antenna.
To Next Page
General