Honeywell LKS 160 - Additional Information; Standards and Approvals; Ordering Information; Accessories

9 EN2C-0112SZ20 R0202
Conformity
• In accordance with EU Directives 73/23/EU
and 93/68/EU. Conforms to
EN 60730 – 1 : 1991 A1 and A11 : 1991
EN 60730 – 2 – 5 : 1991
LKS 160-09 B 5 - 30 S3.P1.1
Circuit version
Drive time for 90°
3s (1,5 Nm) 22s (3,0 Nm)
5s (2,5 Nm) 34s (3.0 Nm)
8s (3,0 Nm) 45s (3.0 Nm)
12s (3.0 Nm) 65s (3.0 Nm)
Type of drive shaft
5 Standard shaft Ø 8, one side bevelled to 7 mm
6 Special shaft, e.g. hexagonal
Direction of rotation
A clockwise
B counter-clockwise
Model
Series
Not for creation of new type
Potentiometer - retrofit set for actuators without relays
(90° = ca 1kΩ) ZPN 160-01
STANDARDS AND APPROVALS
ORDERING INFORMATION
ACCESSORIES
VARIOUS
Potentiometer - retrofit set for actuators with relays
(90° = ca 1kΩ) ZPN 160-06
Other versions on request