PW7K1ICE System Configuration via Web Interface
Login
PW7K1ICE Installation and Configuration Guide, Document 800-26497 37
3.2 Login
1. Launch your web browser. Type the IP address in the browser’s URL field and
press Enter.
2. Click the “Click Here to Login” link to display the User Name and
Password fields.
Figure 3-1: Configuration Manager Login Screen
If DIP Switch #1 is ON, then set
• Default Username to “admin”
and
• Default Password to “password”.
This switch is read on the fly. There is no need to reboot the controller.
• If the security certificate of your server is not valid continue with the next step
“Security Certificate” on page 38.
• If the security certificate of your server is valid, jump to “Web Server
Configuration” on page 41.
To Next Page
Loading...
