What to do if my Honeywell Lyric T6 Thermostat heating system does not respond?
If your Honeywell Thermostat's heating system isn't responding, first, ensure the system is set to 'Heat' and that the set temperature is higher than the current room temperature. Also, verify that the heating system is powered on and the Receiver Box is working. Finally, check the circuit breaker and reset it if necessary.
How to fix a blank screen on a Honeywell Lyric T6?
If the screen on your Honeywell Thermostat is blank, ensure that the power is switched on. Also, check the circuit breaker and reset it if necessary.
What to do if my Honeywell Lyric T6 says 'NO INTERNET'?
If your Honeywell Thermostat displays 'NO INTERNET', please check your internet connection or Wi-Fi router.
What to do if my Honeywell Thermostat has no Wi-Fi signal?
If your Honeywell Thermostat displays 'NO WIFI SIGNAL', please check your Wi-Fi router.
What to do if the Honeywell Thermostat Receiver box LED is red?
If the status LED on the Receiver box is red, it indicates a loss of communication. This may occur because the thermostat is too far from the receiver box, the signal is blocked by the location of the Receiver box, or the thermostat has lost power. Try moving the thermostat or Receiver box closer or relocating them. Also, check the power to the thermostat.
Why is my Honeywell Lyric T6 Receiver box LED green but the boiler won't switch on?
If the Receiver box button LED is green but the boiler does not switch on, the boiler wiring might be incorrect or broken. Check the Receiver box wiring.
What causes a 'No Communication Receiver Box' error on a Honeywell Lyric T6?
A 'No Communication Receiver Box' error on your Honeywell Thermostat means the thermostat isn't receiving communication. This can happen if the RF signal is blocked due to the thermostat's location or if the Receiver box isn't powered. Check the power to the Receiver box.
How to fix a low RF signal on a Honeywell Lyric T6 Thermostat Receiver box?
If the RF signal of the Receiver box is low, it indicates a weak radio signal. Try moving the thermostat or Receiver box closer together or relocate them.
What does a 'Wi-Fi Radio Error' mean on my Honeywell Lyric T6 Thermostat?
A 'Wi-Fi Radio Error' indicates that the Wi-Fi radio of the thermostat is faulty. Replace the thermostat.
What does 'Internal Memory Error' mean on a Honeywell Thermostat?
An 'Internal Memory Error' indicates that the internal memory of the thermostat is faulty. Replace the thermostat.
Instructions for disconnecting or reconnecting the thermostat to a Wi-Fi network, often via the Lyric App.
Guide to activating or deactivating the programmable schedule on the thermostat.
Details on the different types of schedules available for the thermostat, such as Daily or 5+2 days.
Explanation of how to use the holiday mode for energy saving during extended absences.
Steps to remove a specific time period from the thermostat's programmed schedule.
Method for temporarily overriding the current schedule until a specified time.
Information on restricting access to the thermostat's controls, either partially or fully.
General| Backlight | Yes |
|---|---|
| Control type | Touch |
| Product color | Black |
| Memory function | No |
| Smart thermostat | - |
To Next Page
