Honeywell NetAXS-123 Quick Start Up Guide

Honeywell NetAXS-123

48 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

800-05780-V5A | December 2017

Quick Startup Guide

This document describes the basic setup, wiring, and configuration steps for getting started with a NetAXS-

123 access control system.

Setup Process

1. Preparing to Start Up

2. Connecting Devices

3. Powering Up

4. Connecting to the Web Server

5. Logging In to the System

6. Configuring the System

Table of Contents

Other manuals for Honeywell NetAXS-123

User Guide171 pages

Installation Guide76 pages

Startup Guide24 pages

Basic Installation Guide2 pages

Questions and Answers:

J
Jesus FaulknerJul 26, 2025
Why N1000 and NS2 panels don't report on Honeywell Control Unit?
- T
  Timothy HarrisJul 26, 2025
  The N1000 and NS2 panels are not supported downstream from a NetAXS-123 panel. To enable the NetAXS-123 to communicate with the N1000 and NS2 panels, the loop must be configured with an N-485 PCI-3 as the Gateway. However, in this configuration, web functionality is lost. It is recommended that the user swap-out N1000 and NS2 panels with NetAXS-123 panels.

Honeywell NetAXS-123 Specifications

General

Readers supported	2
Operating voltage	12V DC
Humidity	5% to 95% non-condensing
Network Interface	10/100 Mbps Ethernet
Communication	TCP/IP
Power Supply	12 VDC
Outputs	2 relay outputs
Operating Temperature	0°C to 49°C (32°F to 120°F)
Users	Up to 10, 000
Event buffer	50, 000
Reader Interfaces	Wiegand, Clock/Data
Supported Readers	Wiegand
Supported Protocols	TCP/IP
Certifications	UL294, CE
Dimensions	165 mm H x 140 mm W x 45 mm D (6.5 in H x 5.5 in W x 1.8 in D)

Related product manuals

Preview: Honeywell MPA2

Preview: Honeywell VISTA CA-FP-100F

Honeywell VISTA CA-FP-100F

Preview: Honeywell ACS-8

Honeywell ACS-8

Preview: Honeywell MPA1C1

Honeywell MPA1C1

Preview: Honeywell MPA1

Preview: Honeywell MPA2C3

Honeywell MPA2C3