Need help?Do you have a question about the Honeywell VISTA CA-FP-100F and is the answer not in the manual?
General| Category | IP Access Controllers |
|---|---|
| Operating Voltage | 12VDC |
| Humidity | 5% to 95% non-condensing |
| Current Consumption | 100 mA |
| Dimensions | 4.5 x 3.5 x 1.2 inches |
| Compatibility | Honeywell VISTA series |
Important safety and installation notices to prevent unit damage and ensure proper operation.
Diagram showing the overall system layout and component connections.
Illustrates different communication methods for connecting the access control system to a PC.
Detailed steps for installing the mounting plate for the access control system.
Instructions for connecting various peripheral devices to the access control system.
Connects a door sensor to monitor door status and trigger alarms.
Installs an exit button for in-door operation to open the door.
Connects an alarm device using a switch signal for security alerts.
Details how to connect different types of door locks, including NC and NO configurations.
Describes how to connect the system to a network using Ethernet for communication.
Explains the wiring and pin definitions for connecting via RS232 serial port.
Details terminal connections and function for RS485 communication.
Explains Wiegand 26 output for connecting with ID readers or keypads.
Details the power requirements and connection for the device (12VDC).
Guides on connecting an external Wiegand reader to the access control system.
Steps to securely attach the main access control unit to the mounting plate.
Procedures for testing the system after installation, including LED status and auto-test.
Instructions on how to restart the machine using the reset key.
Explains the function of the anti-dismantle button and its alarm signal.
Guides on connecting and using the cable doorbell feature.
To Next Page
