Honeywell NEXH Series User Manual

- 24 -
Camera Function
③ Sensitivity
: User can decide sensitivity of motion detection.
SENSITIVITY LOW → MID → HIGH
④ Output of motion detection
: Motion detection has two output method. One is marking
on screen “ “ icon, and the other is MD signal.
OUTPUT MARK → ALRAM
8-5. MIRORR
MIRROR OFF → H MIRROR →
V MIRROR → FLIP
8-6. STILL
STILL ON/ OFF
: It pause current image. ON is to stop, OFF is to return to
normal state.
<< MD MODE >>
MODE
AREA SEL
SENSITIVITY
OUTPUT
RETURN
OFF
LOW
MARK
< MD MODE >
9. SPECIAL SETUP
9-1. SHARPNESS
: Use to change the contour of Scene.
SHARPNESS 0 ~ 15
9-2. GAMMA
: Gamma is controllable
GAMMA 0.36 → 0.38 → … → USER
<< SPECIAL SETUP >>
SHARPNESS
GAMMA
BAUDRATE
PROTOCOL
LANGUAGE
MONO
8
3
9600
DEFAULT
ENG
RETURN
OFF
< SPECIAL SETUP >
9-3. BAUDRATE
: Please DO NOT Change.
☞ caution
1. If the Baud Rate does not match between Camera
and external system, it may occur the communication failure.
Please make sure a proper Baud Rate.
9-4 PROTOCOL Setting
: Please DO NOT Change.
☞ caution
1. If the protocol does not match between Camera and
external system, it may occur the communication failure.
Please make sure a proper protocol.
9-5 OSD language
LANGUAGE ENG → 한국어 →日本語 →
簡體中文 → 繁體中文
9-6 Color Mode
: Use for changing color and monochrome ( black &
white )mode .
OFF is Color mode, ON is black&white mode.
MONO OFF → ON
10. FACTORY DEFAULT
: At main menu, select icon, and press MENU button.
If you press “Factory default”, all data will be returned
factory default values
Camera Function
<< DEFAULT SETUP >>
FACTORY DEFAULT
RETURN
< DEFAULT SETUP >

Honeywell NEXH Series Specifications

General

Brand	Honeywell
Model	NEXH Series
Category	Digital Camera
Language	English