Need help?Do you have a question about the Honeywell PM42 and is the answer not in the manual?
General| Ribbon Core | 25.4 mm (1 in) |
|---|---|
| Print Technology | Thermal Transfer |
| Print Resolution | 203 dpi |
| Max Print Width | 4.25 inches (108 mm) |
| Max Print Speed | 300 mm/s (12 ips) |
| Connectivity | USB, Serial, Ethernet |
| Memory | 128 MB Flash |
| Media Handling | Roll-fed |
| Media Type | Labels, Tags, Tickets |
| Media Width | 25.4 mm to 114 mm (1 in to 4.5 in) |
| Media Thickness | 0.06 mm to 0.25 mm |
| Core Diameter | 25.4 mm (1 in), 38.1 mm (1.5 in), 76.2 mm (3 in) |
| Max Media Roll Diameter | 203 mm (8 in) |
| Ribbon Support | Supported |
| Ribbon Width | 25.4 mm to 108 mm |
| Max Ribbon Length | 300 m (984 ft) |
| Power Supply | 100-240V AC, 50-60 Hz |
Steps to change printer settings using the printer's front panel menu.
Instructions for configuring settings via the printer's web interface.
Troubleshooting guide for common print quality issues.
Steps for downloading and installing firmware updates.
Instructions on cleaning the printhead, media guides, and exterior.
Step-by-step guide for replacing the printer's printhead.
To Next Page
