2
Cool On
Set ToInside
75
75
This feature helps prevent damage to
the compressor in your air conditioning
or heat pump system.
Damage can occur if the compressor is
restarted too soon after shutdown. This
feature forces the compressor to wait 5
minutes before restarting.
During the wait time, the display will
flash the message Cool On (or Heat
On if you have a heat pump). When
the safe wait time has elapsed, the
message stops flashing and the
compressor turns on.
Message flashes until safe
restart time has elapsed.
Built-in compressor protection
Em Aux
Heat On
Set ToInside
75
75
Replace Batt
Display screen
Current inside
temperature
Temperature setting (or
Desired Temperature when
changing temperature)
If “Heat On” or “Cool On”
is flashing, compressor
protection is engaged.
Low battery
warning
System Status
Cool On: Cooling system is on.
Heat On: Heating system is on.
Em: Emergency heat is on. **
Aux: Auxiliary heat is on. **
** Only for heat pumps with
this capability (select models
only).
To Next Page
Loading...
Need help?
General
