Need help?Do you have a question about the Honeywell PROGRAMMABLE THERMOSTAT RTH6350 and is the answer not in the manual?
General| Model | RTH6350 |
|---|---|
| Type | Programmable Thermostat |
| Stages | 1 Heat/1 Cool |
| Temperature Control Accuracy | ±1°F |
| Hold Feature | Yes |
| Filter Change Alert | Yes |
| Low Battery Indicator | Yes |
| Power Source | Battery Powered |
| Weight | 0.5 lbs |
| Program Type | 5-2 Day Programmable |
Proper disposal instructions for thermostats containing mercury.
Note jumper wire usage on the old thermostat for reference.
Contact Honeywell for assistance with wiring or heat pump systems.
Configuration for single-stage heating and cooling systems.
Instructions for multistage or heat pump systems via advanced installation.
Initial configuration of thermostat settings.
Configure the heat pump changeover valve setting for proper operation.
Select the appropriate heating system and fan operation mode.
Optimize heating system operation by setting the cycle rate.
Set the cycle rate for the second stage of heating operation.
Configure the cycle rate for the emergency heat mode.
Select between manual or automatic system changeover based on temperature.
Enable or disable Smart Response® technology for optimized comfort.
Choose between Fahrenheit or Celsius for the temperature display.
To Next Page