Honeywell Wi-Fi Thermostat 9000 User Manual

Wi-Fi Thermostat 9000
Colour Touchscreen
Installation Guide
HOME: Touch to display Home screen.
FAN: Select fan mode.
SYSTEM: Select system mode (heat/cool).
MENU: Touch to display options. Start
here to set a program schedule.
CURRENT SCHEDULE: Change temperature
setting and select temporary or permanent hold.
INDOOR CONDITIONS: Shows indoor
temperature and humidity.
CURRENT DATE AND TIME.
CURRENT STATUS: Shows system
mode (heat/cool).
OUTDOOR CONDITIONS: Shows outdoor
temperature and humidity (post registration).

Honeywell Wi-Fi Thermostat 9000 Specifications

General

Brand	Honeywell
Model	Wi-Fi Thermostat 9000
Category	Thermostat
Language	English

Summary

Thermostat Interface and Display

Home Screen Overview

Explains the main screen controls and status indicators of the thermostat interface.

System Status and Conditions

Details the display of indoor/outdoor conditions, system mode, and schedule status.

Wallplate Installation Procedure

Mounting the Wallplate

Instructions for separating and mounting the wallplate, including drilling specifications.

Safety and Disposal Notices

Provides critical warnings regarding electrical hazards and mercury disposal.

Wiring Terminals and Designations

Terminal Identification

Details the purpose of each terminal (R, Rc, C, Y, G, W, etc.) for system connections.

Jumper Loop Usage

Explains the function and placement of the jumper loop for different transformer systems.

Conventional System Wiring Guide

1H/1C and Cool-only Systems

Wiring diagrams and terminal connections for single-stage heating/cooling and cool-only systems.

2H/2C and Heat-only Systems

Wiring configurations for two-stage heating/cooling and heat-only systems with fan.

Heat Pump System Wiring Guide

1H/1C and 2H/1C Heat Pump Wiring

Connection details for single and two-stage heat pump systems with O/B changeover.

3H/2C Heat Pump Wiring

Wiring instructions for three-stage heating and two-stage cooling heat pump systems.

Initial Thermostat Setup Process

Basic Configuration Steps

Guide through initial setup: language, installation type, location, and system controls.

System Type Selection

Choosing the correct system type (Forced Air, Heat Pump, Hot Water) for proper operation.

Detailed System Configuration

System Setup Options

Configuring language, thermostat location, system type, and heating/cooling stages.

Fan and Changeover Valve Settings

Setting fan control preferences and configuring the changeover valve for heat pumps.

Wi-Fi Network Connection

Connecting to Your Network

Step-by-step instructions for connecting the thermostat to a wireless network.

Remote Access Registration

Guide for registering the thermostat online for remote access and control.

Advanced Preference Settings

Customizing Scheduling Options

Setting up programmable or non-programmable schedules and period configurations.

Temperature and Lockout Settings

Adjusting temperature limits, keypad lockout, and daylight saving time.

Troubleshooting Common Problems

Display and System Errors

Resolving issues like blank displays, incorrect system settings, or fan operation.

System Response and Mode Issues

Addressing problems with system response, wait messages, and mode conflicts.

Product Specifications and Parts

Technical Specifications

Details on temperature ranges, operating conditions, physical dimensions, and electrical ratings.

Replacement Part Information

Information on ordering accessories and replacement parts for the thermostat.

Safety, Support, and Product Info

Important Safety Warnings

Critical safety instructions regarding power disconnection and mercury disposal.

Customer Assistance and Model Details

Contact information for support and details about the thermostat model and trademarks.