Honeywell Wi-Fi Thermostat 9000 - Initial Thermostat Setup Process; Basic Configuration Steps; System Type Selection

33-00235 6
Initial Setup
Upon initial power up, or after being reset to factory defaults, the initial thermostat options
(language, location, and system type) must be set to define the heating/cooling system.
Other options can be customised later.
Follow prompts on the screen to select appropriate options.
1. Select the language of your choice, then
touch Next.
2. Select Home or Business installation,
then touch Next.
Touch Next, or name the thermostat
location - touch THERMOSTAT and follow
the instructions.
3. Select what the thermostat will control
and touch Next.
Note: Touch the orange Help button on the
screen for more information.
4. Select the system type and touch Next.
(The system type determines other
selections for completing the initial setup.)
5. Touch Next after making selections on
each screen.
6. Touch Done on the last screen. The
thermostat displays an option to connect
to the WiFi network.
Next Next
Next Next
Next