33-00235 8
Connecting to the Wi-Fi Network
Yes
Your Network
Done
Next
Done
After the initial setup, walk the homeowner
through connecting to a WiFi network. Or,
refer the homeowner to the User’s Guide,
so that the homeowner can connect the
thermostat to the WiFi network later.
1. Connect the WiFi network.
Touch Yes to connect the thermostat to
the WiFi network. The screen displays the
message “Searching for wireless networks.
Please wait...” after which it displays a list
of all WiFi networks it can find.
Note: If you cannot complete this step now,
touch I’ll do it later. The thermostat will
display the home screen. Complete this
process by selecting MENU > Wi-Fi Setup.
Continue with Step 2.
2. Select the network.
2a Touch the name of the homeowner’s
network. The thermostat displays a
password page.
Note: If the home network is not shown on
the list, touch Rescan.
2b Using the keyboard enter the
password for the home network.
2c Touch Done. The thermostat displays
“Connecting to your network. Please
wait...” then shows a “Connection
Successful” screen.
2d Touch Next to display the registration
information screen.
2e Have the homeowner register the
thermostat by going to http://www.
mytotalconnectcomfort.com
Note the Thermostat’s MAC and
CRC; they’ll be needed during
registration. Or, refer the homeowner
to the User’s Guide.
Note: The Register Online screen remains
active until you complete registration and/or
touch Done.
3. For remote access, the homeowner or
end-user must register at
mytotalconnectcomfort.com
To Next Page
Loading...
