Honeywell PROGRAMMABLE THERMOSTAT RTH6350 User Manual

RTH6350/RTH6450 Series
25 69-2416ES—05
About your new thermostat
SETUP WIRING ASSISTANCE TROUBLESHOOTING
Leave metal jumper in place, connecting R & Rc
terminals.
If your old thermostat had both V and VR wires,
stop now and contact a qualified contractor for
help.
If your old thermostat had separate O and B
wires, wrap the B wire in electrical tape and do
not connect.
If your old thermostat had Y1, W1 and W2 wires,
stop now and contact a qualified contractor for
help.
If E and Aux terminals do not each have a wire
connected, use a small piece of wire to connect
them to each other.
5
Wiring—Heat Pump
Alternate wiring (for heat pumps only)
If labels do not match letters on the thermostat, check
the chart below and connect to terminal as shown here
(see notes, below).
Wiring complete, return to Step 8.
MCR31275A
E
55
4
2
AUX
XWFH
B
W1
W2
X2
L
OG
F
L
C
YR
R
VRM
VY1
B
X
R
YR
c
RcEGO/BAux

Honeywell PROGRAMMABLE THERMOSTAT RTH6350 Specifications

General

Model	RTH6350
Type	Programmable Thermostat
Stages	1 Heat/1 Cool
Temperature Control Accuracy	±1°F
Hold Feature	Yes
Filter Change Alert	Yes
Low Battery Indicator	Yes
Power Source	Battery Powered
Weight	0.5 lbs
Program Type	5-2 Day Programmable