Honeywell PROGRAMMABLE THERMOSTAT RTH6350 User Manual

RTH6350/RTH6450 Series
15 69-2416ES—05
SETUP WIRING ASSISTANCE TROUBLESHOOTING
Function 2: Heat pump changeover valve
Done Next
2
0
M28352
Press the s or t button to select whether your
changeover valve is used in heating or cooling:
NOTE: If Function 2 does not appear, please turn to the
next page to continue.
0 Cooling changeover valve: Use this setting if
you connected a wire labeled “O” to the O/B wire
terminal (see page 21).
1 Heating changeover valve: Use this setting if
you connected a wire labeled “B” to the O/B wire
terminal (see page 21).
M28351
Press to change setting.
When correct setting is
selected, press NEXT to
display next function.

Honeywell PROGRAMMABLE THERMOSTAT RTH6350 Specifications

General

Model	RTH6350
Type	Programmable Thermostat
Stages	1 Heat/1 Cool
Temperature Control Accuracy	±1°F
Hold Feature	Yes
Filter Change Alert	Yes
Low Battery Indicator	Yes
Power Source	Battery Powered
Weight	0.5 lbs
Program Type	5-2 Day Programmable