EasyManuals Logo

Honeywell Q624A User Manual

Honeywell Q624A
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PRODUCT DATA
60-2049-08
Q624A Solid State Spark Generator
APPLICATION
The Q624A is a solid state spark generator (transformer) for
use on commercial or industrial gas burners.
FEATURES
Ignites gas pilots with spark gaps up to 1/4 inch (6
millimeters) in length.
15,000 volts peak voltage for reliable lightoff.
Prevents detection of the ignition spark when properly
applied in a flame detection system with the
C7027,C7035, or C7044 Minipeeper® or C7061 Dynamic
Self-Check Ultraviolet Flame Detector.
Ignition spark and ultraviolet detector are
synchronized by the alternating current supply
voltage; spark occurs on one half of the ac cycle and
detector operates on the opposite half cycle.
Recommended for interrupted ignition applications
only.
Mounts in the same space used by conventional
ignition transformer.
Q624 mounting holes are the same as standard
transformers; no adapter plate needed.
Impervious to humidity up to 95 percent relative
humidity.
Weighs 3 pounds (1.4 kilograms) versus 8-1/2 pounds
(3.9 kilograms) for standard transformers.
SPECIFICATIONS
IMPORTANT
The specifications given in this publication do not
include normal manufacturing tolerances. Therefore,
this unit may not match the listed specifications
exactly. Also, this product is tested and calibrated
under closely controlled conditions, and some minor
differences in performance can be expected if those
conditions are changed.
Models:
Q624A1014 with threaded terminal nut high voltage electrode.
Electrical Ratings:
Voltage and Frequency: 120 Vac, 50/60 Hz.
Output Voltage: 10,000 volts.
Primary VA Rating: 66 VA at 120 Vac.
Spark Characteristics:
Firing Rage: 60 sparks per second.
Voltage, peak-to-peak: 22,000 volts nonsinusoidal.
Firing cycle peak voltage: 15,000 volts ±500 volts, open
circuit.
Energy Discharge: 200 millijoules per spark.
Discharge Time: 0.3 milliseconds per spark.
Power Dissipation: approximately 12 watts per second.
Maximum High Voltage Lead Length: 15 ft. (4.6 m)
Maximum Spark Gap: 1/4 in. (6 mm).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Q624A and is the answer not in the manual?

Honeywell Q624A Specifications

General IconGeneral
BrandHoneywell
ModelQ624A
CategoryInverter
LanguageEnglish

Related product manuals