BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
34 EN1B-0198GE51 R0801
application firmware versions when an update of
the same becomes necessary.
Command dc defines the IP address of the FTP-
Server, the path to the application firmware, a
username on the FTP-Server and the user’s
password. This command must be invoked prior to
using command load.
Prerequisite for downloading an application
firmware is a running FTP-Server machine
somewhere in the network that can be reached by
the BNA device. The FTP-Server machine is
responsible for storing the application firmware
image that shall be loaded into the BNA device. The
application firmware image for the BNA is
delivered on the distribution media of the Building
Management System that is currently used.
The description of how to setup and invoke an FTP-
Server on each specific operating system is not
within the scope of this document. Please refer to
the documentation set of the operating system used
on the machine that has been selected for the role of
the FTP-Server.
dc is not a direct command; instead, it provides the
following commands in a sub-shell:
display displays current download configura-
tion.
modify changes download configuration. After
entering this command each download
configuration item will be queried
To Next Page
Loading...
Need help?
General
