Honeywell QuietClean HFD-010 series User Manual

QuietClean OM.qxd 3/5/09
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING
THIS AiR PURIFIER
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1.
2.
10.
Read all instructions before operating the air
purifier.
Place air purifier where it ts not easily knocked
over by persons in the household.
Always turn the air purifier to the OFF position and
unplug from the wall outlet when not in use.
To disconnect the air purifier, press the Power
{c} button or turn the knob to the off position
{0) to turn the air purifier off, grip the plug and
pull it from the wall outlet. Never pull by the cord.
Do not use any product with a damaged cord or
plug or if product malfunctions, is dropped or
damaged in any manner. Keep the cord away
from heated surfaces.
Do not use air purifier outdoors.
Never use air purifier unless it is fully
assembled.
Do not run power cord under carpets, and do
not cover with throw rugs. Arrange cord such
that it will not be tripped over.
Do not use air purifier where combustible
gases, vapors or an oxygen rich environment
are present.
Do not expose the air purifier to rain, or use
near water, in a bathroom, laundry area or other
damp location.
Honeywell
QUIETCLEAN® AIR PURIFIERS
Models HHT-215, HHT-217, HHT-219 Series
Models HFD-010, HFD-015, HFD-110,
HFD-112, HFD-116 Series
11. The air purifier must be used in its upright
12,
13.
14.
15.
16.
17.
18.
19.
20.
N
—
position.
Do not allow foreign objects to enter ventilation
or exhaust opening as this may cause electric
shock or damage to the air purifier. Do not
block air outlets or intakes.
Locate air purifier near the outlet and avoid
using an extension cord.
This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
shock, this plug is intended to fit only one way
in a polarized outtet. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician,
DO NOT attempt to defeat this safety feature.
A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn ouilet.
Do not sit, stand or place heavy objects on the
air purifier.
Disconnect power supply before servicing.
WARNING: To Reduce the risk of fire or electric
shock, do not use this air purifier with any
solid-state speed control device.
The sealed UV bulbs contain a small amount of
mercury. Dispose of these items at household
hazardous waste collection sites only. If the UY
bulb breaks, do not vacuum or handle with your
bare hands, (HHT-215, HHT-217 or HHT-219 only.)
This product contains a built-in ionizer. While
the output of ozone of this product is extremely
low, if you have asthma symptoms or breathing
disorders that can be triggered by the presence
of an ionizer, we recommend that you do not
use any type of ionizing or ionic air purifiers.
Only HEPA filtration (non-ionizing} products
are recommended.
‘SAVE THESE
INSTRUCTIONS
The Honeywell trademark is used by Kaz, tac. under license from Honeywell International Inc.
+

Honeywell QuietClean HFD-010 series Specifications

General

Type	Air Cleaner
Model	HFD-010 series
Speeds	3
Control Type	Manual
Filter Type	Permanent Washable Filter
Power Consumption	50W
Design	Tower
CADR (Clean Air Delivery Rate)	100 CFM

Summary

Important Safety Instructions

Air Purifier Features Overview

ifD™ Micro-Filter Technology

Advanced filter technology for capturing microscopic particles with high efficiency and energy saving.

ifD™ Micro-Filter Maintenance

Details on the permanent, easy-to-clean ifD™ Micro-filter and recommended cleaning frequency.

UV Light Technology

Ultraviolet light technology designed to help reduce germs such as bacteria, viruses, fungi, and mould.

Independent Testing and Verification

AHAM Certified verification of air purifiers' clean air delivery rate through a third-party laboratory.

Odor-Lock™ Pre-Filters

Pre-filters made of carbon and zeolite elements to help reduce common household odours.

Introduction and Product Assembly

Product Assembly Components

Overview of key components including ifD™ Micro-filters, pre-filter frames, and UV bulb housings.

Air Purifier Operation and Setup

Odor Control Features

Information on special odor reducing pre-filters and their replacement timing for specific models.

General Setup Instructions

Guidance on selecting a location, ensuring proper airflow, and plugging into a grounded outlet.

Operation of HHT Models

Instructions for turning on/off, changing air cleaning settings, and using the timer function.

Advanced Operation Features

Dual UV Lamp Operation

How to turn the UV lamps on/off and indications of their operation on the unit's display.

Operation of HFD-010 Model

Specific instructions for operating the HFD-010 model using its control knob and indicator light.

Operation of HFD-11x Models

Instructions for power settings, selecting levels, and using the timer function for HFD-11x models.

Filter Maintenance and Cleaning

Filter Clean Indicator System

Explanation of the electronic monitor for filter cleaning and resetting procedures for different models.

Cleaning the ifD™ Micro-Filter

Step-by-step guide for removing, vacuuming, and washing the ifD™ Micro-filter for all models.

Filter Replacement and Installation

Cleaning Washable Pre-Filters

Instructions for removing and rinsing washable pre-filters by hand under warm water.

Installing Odor-Lock™ Pre-Filters

Guide for replacing standard pre-filters with Odor-Lock™ filters for specific model series.

UV Lamp and Filter Installation

Replacing UV Lamps

Procedure for replacing dual UV bulbs, including safety precautions and resetting the indicator.

Installing ifD™ Filter Assembly

Instructions for inserting the ifD™ filter and pre-filter assembly correctly into the unit.

Cleaning, Maintenance, and FAQs

External Cleaning and Maintenance

Guidelines for cleaning external surfaces and recommended frequency for filter cleaning.

Frequently Asked Questions

Answers to common queries regarding filter indicator lights and ozone generation.

Customer Support and Warranty

Consumer Relations Contact

Information on how to contact Kaz Incorporated for questions, comments, and support.

Five Year Limited Warranty

Details of the warranty coverage, limitations, and procedures for returning defective products.