Need help?Do you have a question about the Honeywell RP2B and is the answer not in the manual?
General| Print Method | Direct Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Weight | 270 g (0.6 lbs) (including battery) |
| Resolution | 203 dpi |
| Max. Print Speed | 4 ips |
| Media Type | Labels, Tags |
| Media Width | 58 mm (2.28 in) |
| Interfaces | USB, Bluetooth |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Maximum Print Speed | 4 ips |
| Media Width Range | 58 mm (2.28 in) |
| Memory | 8 MB Flash |
| Power Supply | 7.4V, 2000 mAh Li-ion rechargeable battery |
Access knowledge base, support portal, and report issues.
Service centers worldwide, obtain warranty or non-warranty service.
Information on warranty, go to www.honeywellaidc.com.
Contact Honeywell Technical Communications for documentation feedback.
Overview of the RP Series printer family and its features.
Steps for unpacking the printer, checking contents, and identifying required accessories.
Instructions for correctly loading label rolls or paper into the printer.
Guide to establishing a wired USB connection between the printer and a host system.
Overview of the printer's front panel, including buttons, indicators, and display.
Description of the On/Off button functions and press actions.
Explanation of the Media button function for advancing paper.
Procedure to adjust printer sensors for accurate media detection and alignment.
Steps for performing a quick calibration of the printer's media sensor.
How to print a label containing the printer's current firmware and settings.
Procedures for saving and loading printer configuration files.
Details on battery charge levels, indicators, and when to replace the battery.
How to check the health status of the printer's battery.
Troubleshooting steps for poor print quality, covering cleaning, temperature, and printhead issues.
Resolving issues where the printer falsely indicates no media is present.
Solutions for printers not printing or feeding multiple labels.
Fixes for printers skipping labels during printing.
Troubleshooting for issues with printing character rotations.
Detailed technical specifications covering mechanical, electrical, communication, and environmental aspects.
Diagrams showing safety label locations on RP2B/RP2D printers.
List of all supported linear barcode symbologies for printing.
List of all supported 2D barcode symbologies for printing.
Description of the included belt clip for carrying the printer.
Details on the shoulder and hand straps for RP4 printers, including usage and safety.
Instructions to manually select and set the printer's language emulation mode.
Steps to send sample label formats to the printer using the NETira CT utility.
To Next Page
