Need help?Do you have a question about the Honeywell PX4ie and is the answer not in the manual?
General| Print Technology | Direct Thermal/Thermal Transfer |
|---|---|
| Print Resolution | 203 dpi |
| Max Print Speed | 10 inches per second (254 mm/s) |
| Connectivity | Ethernet, USB, Serial |
| Media Handling | tag, fan-fold |
| Supported Barcode Types | 1D and 2D |
| Supported Media Types | Paper |
Details on supported programming languages like Fingerprint, DP, IPL, ZSim, and DPL.
Instructions on how to change the printer's active command language via menu or webpage.
Step-by-step guide on how to load media for tear-off printing mode.
Instructions for loading media for peel-off (self-strip) printing mode.
Guide for loading media when using the automatic paper cutter option.
Steps to connect the printer to an AC power source and initial power-on.
Methods for connecting the printer to a computer for communication.
Overview of network connectivity options for the printer.
Detailed steps for connecting the printer to an Ethernet network.
Detailed instructions for configuring printer settings using the web page interface.
Troubleshooting common error alerts with their corresponding solutions.
General guidance for identifying and resolving printer issues.
Diagnosing and fixing common print quality issues like weak printouts or lines.
Resolving issues related to Ethernet or wireless network connectivity.
Restoring factory defaults for the printer via web page or main menu.
Steps to restore printer defaults using its web interface.
How to restore printer defaults using the main menu on a full touch printer.
Performing a hardware reset to restore the printer to factory defaults.
Information on obtaining and upgrading the printer's firmware.
Procedure to upgrade printer firmware using the web page.
How to upgrade printer firmware using a USB storage device.
General guidelines and precautions for maintaining a clean printer.
Step-by-step guide for cleaning the printhead for optimal print quality.
Process for replacing the printer's printhead when it wears out.
How to adjust printhead pressure for different media types.
Calibrating the optional label taken sensor for media detection.
To Next Page
