Need help?Do you have a question about the Honeywell PC42E-T and is the answer not in the manual?
Information on accessing the Honeywell knowledge base and technical support portal.
Details on obtaining service and repair for Honeywell products worldwide.
Information on accessing warranty details for Honeywell products.
Key safety warnings regarding moving parts, hot components, and electrical hazards.
Overview of the PC42E-T printer, its design, and key features.
Illustrations identifying the front and rear features of the PC42E-T printer.
Explanation of the functions and actions associated with the Print button.
Details on how to use the ECO button to enable or disable ECO mode for media conservation.
Description of the status LED states and their corresponding printer conditions.
Information on the types of media supported by the printer and media width specifications.
Automatic sensing of label-to-label data streams and languages for printing.
Directly printing PDF files without additional middleware.
Using an English-like syntax to create labels, tickets, and tags.
Interpreting Datamax data streams without host programming changes.
Simulating Eltron printer command language (EPL).
A BASIC-inspired language for custom label formats and printer applications.
Host-based language for designing, modifying, and downloading label formats.
Simulating Zebra printer language (ZPL II) for label creation.
Instructions for setting the printer command language via its web interface.
Steps to configure the printer command language using Honeywell PrintSet 5 software.
Information on downloading and installing necessary printer driver software for PC communication.
Step-by-step guide to install the Honeywell Windows driver using InterDriver.
Instructions for connecting the printer to a PC using a USB cable.
Guidance on connecting the printer to a PC using a USB-to-serial cable.
Steps to connect the printer to a network via an Ethernet cable.
Procedure to set up Wi-Fi communication using the printer's web page.
Steps for configuring Wi-Fi settings using the Honeywell PrintSet 5 software.
Instructions for configuring Bluetooth settings via the printer's web page.
Steps to configure Bluetooth settings using the Honeywell PrintSet 5 software.
Details on configuring printer settings through its web interface.
Instructions for changing printer configuration settings using the Honeywell PrintSet 5 software.
Procedure for downloading the latest printer firmware from the Honeywell website.
Steps to upgrade printer firmware using the web page interface.
Guide to upgrading printer firmware using the PrintSet 5 Firmware Update Wizard.
Instructions for updating printer firmware using a USB storage device.
Information on finding the printer's configuration and serial numbers on the product label.
A guide to identifying and resolving common printer operational issues.
Method to reset the printer to factory default settings using the Print button.
Information on accessing printer specifications, software, and documentation online.
Detailed specifications for various media types, widths, lengths, and diameters.
List of sensors used by the printer, including Mark, Head Lift, and Gap sensors.
List of fonts pre-installed and available for use on the printer.
List of fonts pre-installed and available for use on the printer.
Information on fonts that can be downloaded for expanded language and character support.
Types of fonts supported by the printer, including TrueType, OpenType, and Bitmap.
List of one-dimensional barcode symbologies supported by the printer.
List of one-dimensional barcode symbologies supported by the printer.
List of two-dimensional barcode symbologies supported by the printer.
Types of graphic file formats that the printer can process, such as PCX, PNG, GIF, and BMP.
Overview of default settings that are restored when the printer is reset.
Default IPv4 settings for Ethernet connectivity, including IP assignment and IP address.
Default IPv6 settings for IP address assignment.
Default settings for 802.1x network authentication, including security and EAP type.
Default selection for the type of media loaded in the printer.
Default selection for the type of media loaded in the printer.
Default printing method, such as Thermal Transfer or Direct Thermal.
Default setting for the left margin of the label on the printable area.
Default width of the printable area measured across the printhead.
Default length of the printable area measured from the edge to the printhead.
Default printer media mode, such as tear-off, peel-off, cutter, or rewind.
Default setting for clipping labels that extend beyond the printable area.
Default adjustment for media feed (positive or negative) before printing.
Default adjustment for media feed after printing a label.
Default mode for media calibration, including Fast (ECO) and Slow options.
Additional media length printed when Media Calibration Mode is set to Slow.
Setting for the printer's label printing speed.
Setting to adjust the image darkness for media and ribbon.
Setting for the media's sensitivity to printhead heat.
Setting to adjust the blackness of the printed output.
Setting to rotate the label orientation by 0, 90, 180, or 270 degrees.
Setting for the printer's network identification name.
Setting for the physical location of the printer.
Setting for the printer administrator's contact information.
Setting to determine if the printer provides XML responses to requests.
Setting for the printer's on-screen display language.
Setting for the language used on the printer's web page.
Setting for the language of an external keyboard connected to the printer.
Setting for the printer's current time.
Setting for the printer's current date.
Setting to define the printer's command language, requiring a restart if changed.
Setting to select the unit of measure for printing parameters.
Setting to control how the zero character is displayed (0 or Ø).
Setting for the printer's time zone.
Setting to automatically adjust for Daylight Saving Time.
Setting to enable or disable compatibility modes for older EasyCoder models.
Setting to enable or disable Ethernet communication.
Setting to enable or disable Wi-Fi communication.
Setting to enable or disable Bluetooth communication.
Setting to enable or disable the printer's web server.
Setting to enable or disable File Transfer Protocol (FTP) support.
Setting to enable or disable Net1 communication for Direct Protocol.
Setting to enable or disable the Line Printer Server (LPR) daemon.
Setting to enable or disable Telnet communication.
Setting to enable or disable Secure Socket Handling (SSH).
Setting to enable or disable XML printing.
Setting for the printer to synchronize time with a network time server.
Setting to enable or disable 9300 TCP/IP port for HCD communication.
Setting to enable or disable communication with Honeywell Cloud.
Setting for the IP address of the primary DNS server.
Setting for the IP address of the secondary DNS server.
Setting for handling multiple Net1 connections.
Setting for the Net1 TCP port number.
Setting for characters echoed to indicate a new line.
Setting for the timeout value in seconds for connection checks.
Setting to enable TLS encryption for Net1 data communication.
Setting for the printer's communication mode with the email server.
Setting for the port number used to communicate with the email server.
Setting for the IP address of the email server.
Setting for the recipient email address for alert messages.
Setting for the sender email address for alert messages.
Password for communicating with the SMTP SSL service.
Setting for the IP address of the primary WINS server.
Setting for the IP address of the secondary WINS server.
Setting to determine if the image buffer appears on the printer web page.
Setting for the web server protocol (HTTP/HTTPS).
Setting to determine if a customized web page is used.
Setting for the IP address of the connectivity server.
Setting for the hostname of the connectivity server.
Setting for the port number used to communicate with the connectivity server.
Setting for the frequency of telemetry data sent to the connectivity server.
Setting for the unique ID from the connectivity server.
Setting for the fingerprint ID from the connectivity server.
Setting for the interval to send auto update requests.
Setting for the buzzer to beep during downloads/updates.
Setting for the TCP port number for XML printing.
Setting to enable TLS encryption for XML printing.
Setting to enable TLS encryption for device management communication.
Overview of the INPrint page features for printing single labels and using predefined formats.
Instructions for printing labels using web forms via the printer's IP address.
Item description for the cutter module included in the shipping box.
Step-by-step instructions for installing the cutter module onto the printer.
Item description for the peel-off module and fastening screws.
Step-by-step instructions for installing the peel-off module onto the printer.
Items included in the shipping box for the Bluetooth or Bluetooth/Wi-Fi module.
Step-by-step instructions for installing the Bluetooth or Bluetooth/Wi-Fi module.
To Next Page
General
