Need help?Do you have a question about the Honeywell PX6i and is the answer not in the manual?
General| Print Technology | Thermal Transfer, Direct Thermal |
|---|---|
| Print Resolution | 203 dpi, 300 dpi |
| Print Speed | up to 10 ips |
| Media Thickness | 0.0025" to 0.01" |
| Connectivity | Serial, Parallel, USB, Ethernet |
| Memory | 16 MB Flash |
| Operating System Compatibility | Windows, Linux |
| Max. Print Width | 4.09" (104 mm) |
| Supported Barcode Types | 1D, 2D |
| Supported Media Types | Labels, Tags |
Explains how to choose the printer's command language upon startup.
Introduces the process of loading various types of media into the printer.
Step-by-step guide for loading media for tear-off printing mode.
Instructions for loading media for peel-off printing mode.
Details on loading media for cut-off printing, including cutter option.
Guide to loading media for internal batch takeup printing mode.
Instructions for loading media from an external source.
Step-by-step guide for loading thermal transfer ribbon.
How to print a test label for verification and troubleshooting.
Specific considerations for printing on RFID media for optimal quality.
Options for connecting the printer to a PC via serial, USB, or parallel ports.
Detailed steps for serial connection, including required settings.
Overview of network connection options (Ethernet, Wireless).
Steps to configure the printer for Ethernet network connectivity.
Method to manually set IP addresses using serial commands.
Guide to setting up wireless (802.11) connectivity and security.
Guide to configuring printer settings using the on-screen menu.
How to configure settings via the printer's web-based home page.
Configuring IP address, subnet mask, and router settings.
Choosing between Ethernet and Wireless 802.11 network types.
Information on downloading and upgrading printer firmware.
Steps to upgrade firmware using PrintSet software.
General guidance for diagnosing and resolving printer issues.
Explains how to interpret error messages displayed on the printer screen.
Lists and explains error messages specific to Fingerprint firmware.
Lists and explains error messages specific to IPL firmware.
Addresses issues related to print quality and their resolutions.
Procedures for resetting the printer to factory default settings.
Step-by-step guide for replacing the printer's printhead.
To Next Page
