Need help?Do you have a question about the Honeywell Intermec PD43 and is the answer not in the manual?
General| Print Technology | Thermal Transfer / Direct Thermal |
|---|---|
| Power Supply | 100-240 VAC, 50/60 Hz |
| Print Resolution | 203 dpi (8 dots/mm) |
| Max. Print Width | 104 mm |
| Media Width | 19 mm to 110 mm |
| Media Thickness | 0.06 mm (0.003 in) to 0.20 mm (0.008 in) |
| Connectivity | USB, Serial, Ethernet, Bluetooth |
| Memory | 128 MB Flash |
| Operating System Compatibility | Windows, Linux |
| Dimensions | 211 mm x 180 mm |
| Weight | 2.5 kg (5.5 lbs) |
| Operating Temperature | +5°C to +40°C (+41°F to +104°F) |
| Storage Temperature | -40 to 60°C |
Explains how to connect the PD43 and PD43c printers to an AC power source using the appropriate cables.
Guides users on using the Setup Wizard for initial printer configuration on LCD printers after power-up.
Lists the available methods for viewing and changing printer settings, such as web page or Main Menu.
Details how to change printer configuration settings using the printer's web page interface.
Describes using PrintSet 5 software for easily changing printer configuration settings and using setup wizards.
Provides contact information and necessary details for obtaining technical support from Intermec for printer issues.
Presents a table of common printer problems and their corresponding troubleshooting solutions.
Outlines the methods for restoring the printer to its default factory settings.
Details how to upgrade printer firmware using the printer's web page interface.
Provides a procedure for cleaning the printer's printhead using a cleaning card and isopropyl alcohol.
Details the process for safely replacing a worn-out printhead in the printer.
To Next Page