Chapter 4 — Configure the Printer
PD43 and PD43c Commercial Printer User Manual 95
How to Configure the Printer
Use one of these methods to view and change printer settings:
• Printer web page
• Main Menu (LCD printers)
• PrintSet 5
• Programming commands
• SmartSystems
View the Configuration Summary
If you are using Ethernet or Wi-Fi communications, you can view a
complete summary of all printer configuration settings from the
printer web page. You should have already connected your printer to
your network and obtained an IP address.
1 Open a web browser on your PC.
2 In the Location or Address bar, type the printer IP address, and
then press Enter. The printer web page appears.
3 Click the Configure tab.
Note: This process may take several minutes depending on the options
in your printer and your network connection.
To Next Page
Loading...
