Honeywell Intermec PD43 User Manual

Chapter 3 — Connect the Printer
82 PD43 and PD43c Commercial Printer User Manual
2 For a USB-to-Serial adapter, connect the adapter cable to the serial
port on your PC. Continue with the next step.
For a USB-to-Parallel adapter, connect the adapter cable to the
parallel port on your PC. The printer is ready to communicate with
your PC.
3 If you are using an LCD printer, from the printer Main Menu select
Settings > Communications > Serial and change settings as
necessary.
If you are using an icon printer, you need to configure settings
through an application such as PrintSet 5.
How to Connect the Printer to Your Network
You can connect the printer to your network using the:
• Ethernet interface.
• Wi-Fi + Bluetooth wireless interface.
These network interfaces provide features such as security, FTP server,
web page, and Alert handling.
Connect the Printer to an Ethernet Network
If your printer has an Ethernet module, you can connect it to your
wired network.
By default, the printer supports DHCP networks. If you are not using
a DHCP network, you need to configure wired Ethernet settings by
using Intermec PrintSet 5 through a USB connection to the printer.

Honeywell Intermec PD43 Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Power Supply	100-240 VAC, 50/60 Hz
Print Resolution	203 dpi (8 dots/mm)
Max. Print Width	104 mm
Media Width	19 mm to 110 mm
Media Thickness	0.06 mm (0.003 in) to 0.20 mm (0.008 in)
Connectivity	USB, Serial, Ethernet, Bluetooth
Memory	128 MB Flash
Operating System Compatibility	Windows, Linux
Dimensions	211 mm x 180 mm
Weight	2.5 kg (5.5 lbs)
Operating Temperature	+5°C to +40°C (+41°F to +104°F)
Storage Temperature	-40 to 60°C