Chapter 4 — Configure the Printer
106 PD43 and PD43c Commercial Printer User Manual
4 To upload all files to the printer, select Install All and then press
. All valid files are uploaded to the printer memory.
To upload only one file at a time:
a Select the type of item you want to upload (Applications,
Fonts, Forms/Layout, Web Forms, Images, Fingerprint
Programs, or Display) and then press .
b Select the file from the list and then press . The file is
uploaded to the printer memory.
Export Applications and Files to a USB Storage
Device
This topic explains how to export applications and files from the
printer to a USB storage device.
1 Make sure the USB storage device has a single partition and is
formatted as FAT16 or FAT32.
2 Insert the storage device into the USB host port on the printer. The
USB Device menu appears.
3 Select Export Resources and then press . All applications and
files in printer memory are copied to the USB storage device.
Export a Configuration File to a USB Storage
Device
You can save an .xml configuration file to a USB storage device and
install it on other printers.
1 Make sure the USB storage device has a single partition and is
formatted as FAT16 or FAT32.
2 Insert the storage device into the printer USB host port.
3 From the Ready screen, press . The Main Menu appears.
Note: You can only export applications and files that you previously
uploaded to the printer memory.
To Next Page
Loading...
