PC42E-T Desktop Printer User Guide 55
INSTALLING ACCESSORIES
Cutter Module
The cutter module allows you to cut non-adhesive media into individual labels.
Out of the Box
You will find the following item in the shipping box: cutter module.
Installation
1. Turn the printer off and disconnect the power cord.
2. Press in on the cover latches on both sides of the printer and open the cover.
3. Press in both locking buttons to open the print and ribbon mechanism.
Caution: Before you begin, turn off the printer and disconnect the power
cord and communication cables.
To Next Page
Loading...
Need help?
General
