13
Scan a Barcode
For optimum performance, avoid reflections by scanning the
barcode at a slight angle.
1. Press or double-tap to open the Hottab utility.
2. Touch Device ON/OFF.
3. If the Barcode icon
is white, touch it to
enable the barcode
function. (If the icon is
orange, it is already
enabled.)
4. Point the tablet at the
barcode.
5. Press the Fn2 button.
Center the aiming
beam over the barcode.
6. Release the Fn2 button.
Fn2 Programmable shortcut
button.(The default is the
camera app.)
Volume/
Brightness
Raise or lower the volume or
brightness.
Button Name Description