RTH2300/RTH221
17 69-2728ES—01
SETUP WIRING ASSISTANCE TROUBLESHOOTING
System setup
Function 15: Compressor Protection
1 On
0 Off
Press the s or t button to select Compressor Protection
settings.
Compressor Protection: This feature forces the com-
pressor to wait approximately 5 minutes before restarting,
to prevent equipment damage. During the wait time, the
message “Cool On” or “Heat On” is displayed on screen.
15
1
M32723
Press to
change
setting.
When finished,
press s and t
to advance to the
next function.
M33591
AND
OR
To Next Page
Loading...
