Programmable Thermostat RTH2300
3
Simply perform the three steps below and the thermostat is in operation:
Set the clock ................................................................................................ See page 6
Select whether to heat or cool...................................................................... See page 7
Select whether to run the fan continuously or only when needed................ See page 8
This thermostat is pre-set with energy-saving program settings. If you do not wish to use
these settings, you can:
Modify the schedule ....................................................................................See page 11
Temporarily override the schedule ............................................................. See page 12
Permanently override the schedule............................................................ See page 13
This thermostat is ready to go
To Next Page
Loading...
