Honeywell RTH2510 - Getting Started: Thermostat Ready to Go

RTH2510/RTH2410 Programmable Thermostat
3 69-2420ES—01
Simply perform the three steps below and the thermostat is in operation:
 Set the clock ................................................................................................ See page 6
 Select whether to heat or cool...................................................................... See page 7
 Select whether to run the fan continuously or only when needed................ See page 8
Your thermostat is pre-programmed with energy saving settings. If you do not wish to use
these settings, you can:
 Modify the schedule (RTH2510) .................................................................See page 11
 Modify the schedule (RTH2410) ................................................................ See page 12
 Temporarily override the schedule ............................................................. See page 13
 Permanently override the schedule............................................................ See page 14
This thermostat is ready to go
69-2420E_A.fm Page 3 Thursday, March 18, 2010 9:49 AM