Honeywell RTH2510Series - To adjust program schedules (RTH2510)

RTH2510/RTH2410
11 69-2601EF—03
Mo
Wake
Set Schedule
Set
am
75
6
:
30
M32704
To adjust program schedules (RTH2510)
1. Press SET until Set Schedule is displayed.
2. Press s or t to set your Wake time for the
day displayed, then press SET.
3. Press s or t to set the temperature for this
time period, then press SET.
4. Set time and temperature for the next time
period (Leave). Repeat steps 2 and 3 for each
day’s time period.
5. Press RUN to save & exit.
Note: Make sure the thermostat is set to the system
you want to program (Heat or Cool).
Press SET 3 times, then adjust time.
Press SET, then set desired temperature.