Installation Guide
69-2104ES—01 20
System setup
NOTE: Press NEXT button to continue.
Setup functions Settings & Options
0180 Heating Fan
Control
Press s/t to select your heating system & fan control:
0 Gas or oil heat: Use this setting if you have a gas or oil heating
system (system controls fan operation).
1 Electric heat: Use this setting if you have an electric heating system
(thermostat controls fan operation).
0190 Heat Pump
Changeover
Valve (for heat
pumps only)
Press s/t to select whether your changeover valve is used in heating or
cooling:
0 Cooling changeover valve: Use this setting if you connected a wire
labeled “O” to the O/B terminal (see page 10).
1 Heating changeover valve: Use this setting if you connected a wire
labeled “B” to the O/B terminal (see page 10).
To Next Page
Loading...
