Honeywell RTH7600 - Page 5

RTH7600
3 69-2207ES—03
This thermostat is ready to go!
Your new thermostat is pre-programmed and ready to go. All you have to do is set the
time and day. Then check the settings below and change if needed:
1. Set clock ................................................................................................................. See page 6
2. Select fan setting: Preset to Auto .....................................................To change, see page 7
3. Select system setting: Preset to Heat ..............................................To change, see page 8
4. Program schedules: Preset to energy-saving levels
while you’re at work or asleep (assumes you wake at
6 am, leave at 8 am, return at 6 pm and go to bed
at 10 pm) .................................................................................... To change, see pages 9–11
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and manually adjust the
temperature (see pages 12–13).