Chapter 1: Product Features of ScanPal Series EDA70-X Terminal
10
User Guide for ScanPal Series Terminal
5. Press down the battery cover safety button to move the battery cover safety lock to the
lock position at left
Battery icon
Battery icon on the status bar shows the power status of the battery. The following table
only contains several of the icons. For detailed information about battery life and power
remained, please go to Settings > Battery.
Battery icon
Icon Status
Battery power is 100% full
Battery power is 50% full
Battery power is too low. Replacing the battery right now.
The terminal has been connected to external power supply for charging.
Battery failure occurs. Please replace the battery. If the failure still exists,
please contact Honeywell technical support.
To Next Page
Loading...
