Honeywell Sensepoint XCL

2
1
Sensepoint XCL
Fixed Gas Detector
Quick Start Guide
Read and understand the Sensepoint XCL Operating Instructions before installing, operating or servicing this product.
These are available for download from the Honeywell Analytics website. Visit www.honeywellanalytics.com.
1 Safety
Installation must be in accordance with the recognized standards of the appropriate authority in the country and locality
concerned.
2 Analog (mA) Output Versions
1) +24 V DC or 24 V AC 2) 0 V or 24 V AC
3) 4 to 20 mA 4) Common
3 Modbus RTU Output Versions
1)
+24 V DC or 24 V AC 2)
0 V or 24 V AC
3) A 4) B
4 Relay Output
1) Normally closed (NC) 2) Common
3) Normally open (NO)
5 Securing the Back Box to a Wall
1. There are four screw positions in the rear of the back box for mounting purposes.
Punch the required screw positions or drill using a 4 mm drill.
2. Secure the back box in its mounting position with suitable fixings appropriate to the
mounting surface. Do not over-tighten.
3. There are four cable entry knock-outs on three of the sides and rear face of the back
box. Drill or punch the entri
es as required.