For more information, please refer to the Sensepoint App manual.
When a Bluetooth® connection is established, the detector’s reading is displayed on the app interface with the gas type
and other information.
12
Specifications
Physical specification
Dimension 113 mm × 113 mm × 59 mm (4.4 × 4.4 × 2.3 in)
Weight 500 g (1.1 lb)
Power supply
DC input voltage (nominal) 24 V DC†
AC input voltage (nominal) 24 V AC‡, 50/60 Hz
Maximum power consumption
mA Versions < 1.2 W (toxic), < 1.7 W (flammable)
Modbus versions < 0.7 W (toxic), < 1.2 W (flammable)
Relay versions Additional 0.6 W
Outputs
§
Analog output 0 to 22 mA sink or source (configurable)
Digital output Modbus RTU
Relay output 2 × dry contact relays for fault and alarm signalling. Rated at 5 A @ 24 V DC, 5 A @ 240 V AC
Operating Environment
Operating temperature −20 to 50°C (−4 to 122 °F)
Storage temperature 0 to 30°C (32 to 86 °F)
Humidity 0 to 99% (non-condensing)
¶
Atmospheric pressure 90 to 110 kPa
Ingress protection IP65 / Type 4 (in accordance with NEMA 250)
Installation category II (UL/CSA/IEC/EN 61010-1)
Pollution degree 2 (UL/CSA/IEC/EN 61010-1)
Cable Gland
Inner knock-out M20 or ½ NPT
Gas Test Tubing
Inner diameter 4 or 6 mm
Outer diameter 6 or 8 mm
†
mA versions: 11 to 32 VDC, Modbus versions: 9 to 32 VDC
‡
20 to 27 VAC
§
Dependent on version
¶
Flammable catalytic versions: 10 to 90% RH. Operating the detector outside of this range may result drift and a
decrease detector accuracy.
To Next Page
Loading...
