17
69-0908—1
Cooling will not come on (Cont). ten minutes and displays COOL, contact the
Honeywell Customer Assistance at 1-800-468-1502.
The house is too warm or too cool. ■ Press PRESENT SETTING key to check the current
temperature setting.
■ If desired, change the temperature setting. See page 5.
SYSTEM ON indicator is lit, but no ■ Allow time for the furnace to heat up and the fan to
heat is coming from the registers. come on before checking for heat at the register.
The furnace or air conditioner On ■ Contact your heating or air conditioner contractor. If
cycle is too short or too long. further assistance is needed, call Honeywell Customer
Assistance at 1-800-468-1502.
The current thermostat ■ Be aware that it is normal for the current setting
setting does not match the and display temperature to differ occasionally.
display temperature.
bAt Lo
remains on display after ■ Remove batteries. Wait one hour. Install fresh alkaline
fresh batteries are installed. batteries.
To Next Page
Loading...
Need help?
General
